Practical guides
From the Act to practice, step by step.
Guides for the procurement teams of contracting authorities: what to do, in what order and on which section of the Act.
The reform of 1 November 2026: what changed for contracting authorities
Since 1 November 2026 the Public Procurement Act has only two value thresholds: the simple procurement threshold and the international threshold. This guide sets out what changed for contracting authorities, what did not, which procurements the earlier rules still govern and what follows on 1 January 2027.
§ 14(1) · § 14(3) · § 14(4) · § 15(1)
The simple procedure (lihthankemenetlus), step by step
The simple procedure is the procedure a contracting authority uses for contracts from the simple procurement threshold up to the international threshold. This guide follows it from the decision to use it to the standstill period and contesting.
§ 15(1) · § 23(1) · § 14(1) cl 1 · § 14(1) cl 2
Technical specifications, brands and standards
How the Public Procurement Act regulates the content and drawing up of technical specifications, references to brands and standards, the ‘or equivalent’ rule and labels, and how the specifications relate to the other requirements of a procurement.
§ 87(1) · § 87(1) cl 1 · § 87(1) cl 2 · § 87(2)
Contestation: what a contracting authority does when a procurement is contested
Who may contest, within which periods, and what the contracting authority does when a contestation notice reaches it: the response, suspension, the decision of the Review Committee, the standstill period and the voidness of a contract.
§ 185(1) · § 185(2) · § 185(4) · § 185(5)
Estimated value of a public contract and dividing a procurement into lots
The estimated value decides which rules of the Public Procurement Act apply to a purchase. This guide sets out how the contracting authority calculates it, the special rules for supplies, services, works and concessions, and when a procurement may be divided into lots or into separate procurements.
§ 15(1) · § 15(2) · § 15(11) · § 14(1) cl 1
Framework agreements (raamleping) and mini-competitions
A framework agreement sets the terms of the public contracts a contracting authority will award under it later. This guide covers its term and parties, the award of contracts with and without a mini-competition, the standstill period, nullity and contesting.
§ 4 cl 15 · § 4 cl 17¹ · § 29(1) · § 23(4)
The open procedure (avatud hankemenetlus), step by step
The open procedure is, with the restricted procedure, the default procedure for a public contract at or above the international threshold, and in it any economic operator may tender. This guide follows it from the contract notice through the time limits, the opening and evaluation of tenders and the standstill period to the contract award notice.
§ 15(2) · § 14(3) · § 48(1) · § 48(3) cl 2
The negotiated procedure without prior publication (direct award)
The negotiated procedure without prior publication lets a contracting authority negotiate a public contract with chosen economic operators without a contract notice. This guide sets out the grounds that allow it, how it is run, the notices and the risk of a void contract.
§ 48(1) · § 73(1) · § 49(1) cl 1 · § 49(2)
Procurement rules (hankekord), the procurement plan and preparing a procurement
Which contracting authorities must establish internal procurement rules, what the rules and the annual procurement plan must cover and how they are published, and how market consultations and the prior involvement of economic operators are handled.
§ 9(1) · § 9(2) · § 9(3) · § 9(4)
Grounds for excluding tenderers and candidates, their verification and self-cleaning
Before it awards a public contract, the contracting authority checks that no ground for exclusion applies to the tenderer or candidate. This guide sets out the mandatory and discretionary grounds, how the authority verifies them through the Single Procurement Document and supporting documents, when a tenderer may restore its reliability (self-cleaning), and how an exclusion is decided, notified and contested.
§ 95(1) · § 95(1) cl 1 · § 95(1) cl 2 · § 95(1) cl 3
Qualification of tenderers and the Single Procurement Document
A contracting authority may set selection criteria on the suitability, economic and financial standing and technical and professional ability of tenderers and candidates. This guide explains how those criteria must be proportionate, how the Single Procurement Document (hankepass) and e-Certis work, when a tenderer may rely on other operators and when the authority checks the evidence.
§ 98(1) · § 98(2) · § 98(3) · § 98(4)
Award criteria, life-cycle costing and the evaluation of tenders
How the contracting authority sets the award criteria (pakkumuste hindamise kriteeriumid) for the most economically advantageous tender, weights them and calculates life-cycle costs, and how it then checks conformity, evaluates the tenders, declares the successful tender and assesses variants.
§ 85(1) · § 85(2) · § 85(3) · § 85(4)
Abnormally low tenders and the rejection of all tenders
A tender whose value is abnormally low given the subject matter of the contract must be explained before the contracting authority can accept it. This guide sets out when the authority must ask for an explanation, what the explanation may rely on, when the tender must or may be rejected, and when the authority may reject all tenders.
§ 115(1) · § 115(1¹) · § 115(2) · § 115(2¹)
Modifying a public contract during its term
A public contract may be changed after award without a new procurement only on the grounds of § 123 of the Public Procurement Act. This guide takes the contracting authority through those grounds step by step: review clauses, small modifications, additional purchases, unforeseeable circumstances, replacement of the contractor and non-substantial changes, followed by the register notices and termination.
§ 120(1) · § 123 · § 124 · § 123(1)
Conflict of interest in public procurement
How the Public Procurement Act defines a conflict of interest and whom it concerns, what the contracting authority must do to prevent, identify and remedy it, when a tenderer may be excluded because of it, and how prior involvement in preparing a procurement is handled.
§ 4 cl 8 · § 3 cl 4 · § 9(4) · § 9(4) cl 6
Bidding in an Estonian public procurement as a foreign company
For a company established outside Estonia that wants to bid in an Estonian public procurement: who may take part, where procurements are published and how tenders are submitted, the language, how exclusion and qualification work with documents from your home state, joint tenders and subcontractors, time limits and how to contest a decision.
§ 3 cl 2 · § 4 cl 11 · § 4 cl 19 · § 7(3)
Want your procurement documents checked before publication? We will show you how Procurelex Verifika does it.
Request a demoGeneral information on the Public Procurement Act in force. Not legal advice.